Selection of valves, grids, diffusers and balancing system

The program «Two Clouds. Ventilation» allows you to select and insert network elements into the project, such as diffusers, grilles, valves, in particular, fireproof ones. When calculating the ventilation system in the program «Two Clouds. Ventilation» takes into account the resistance of all elements and selects such settings of grilles, diffusers and valves, at which the ventilation systems become balanced. Calculations, calculation results and models (families) are available in both Revit and AutoCAD.

Selection of grids

Adjust in the program and select the grilles with swivel and fixed blinds, slotted, exterior, honeycomb and other types of grilles. The program allows you to configure and select up to five settings with the corresponding coefficients of local resistance for each grid. In addition, the program supports grids with built-in regulators.

Selection of diffusers

Adjust in the program and select one, two, three and quadrilateral, cellular, nozzle and other straight and round diffusers. The program allows you to configure and select up to five settings with the corresponding coefficients of local resistance for each diffuser. In addition, the program supports diffusers with built-in regulators.

Fire dampers

The program allows you to choose the necessary fire damper according to its shape (round or rectangular), series, size, fire resistance, modifications (normally open, normally closed, smoke, double action, etc.), performance (duct, wall with different outlets, etc.) , position, type and voltage of the drive power supply and various options. This takes into account that a fire damper may have different CCM depending on its location and configuration of the grille.

Throttle valves

Enter an unlimited number of valve chokes into the program. It is necessary to specify the series, name, dimensions and settings of the valves, after which the program will select the necessary valve setting that provides the required pressure loss at the required air flow.

Unloading Grilles, Diffusers and Valves in AutoCAD

Upload customized grilles, diffusers and valves to AutoCAD in DXF format so that designers can put your equipment into their projects.

Unloading Grilles, Diffusers and Valves to Revit

Selected grilles, diffusers and valves can be unloaded in Revit. Paged families have the appropriate equipment geometry and connections with other equipment. The families also contain all the parameters necessary for the designer.